TXADMIN will only work on servers ordered after 25-06-2020. If you ordered a server before this date, please contact support.
In this tutorial we are going to explain how to enable TXADMIN. txAdmin is a full featured web panel to Manage & Monitor your FiveM Server remotely.
Login on your game panel
In the server overview, click on the name of your server

Click on Startup

Set enable txadmin to 1

Go to the console and start your server
Copy the pin code and port inside the console. You need this in one of the next steps

Important! Read this carefully. Port 3005 is my txadmin port for this test. Yours will be different! You just copied your txadmin port in step 6.
Open your browser and go to http://yourserverip:txadminPort example: http://164.132.151.157:3005.
Enter the pin code and click on link account

You need to give txadmin permissions now. Click on Yes, allow

Enter a backup password for txadmin

Configure the a new txadmin profile. Click on next

Enter a servername and click on next

Enter the serverdata folder: /home/container/. Click on next

Enter your server.cfg location: /home/container/server.cfg. Click on next

Click on Save & Start server

Txadmin is now ready to use!

In this tutorial we are going to explain how to enable TXADMIN. txAdmin is a full featured web panel to Manage & Monitor your FiveM Server remotely.
Login on your game panel
In the server overview, click on the name of your server

Click on Startup

Set enable txadmin to 1

Go to the console and start your server
Copy the pin code and port inside the console. You need this in one of the next steps

Important! Read this carefully. Port 3005 is my txadmin port for this test. Yours will be different! You just copied your txadmin port in step 6.
Open your browser and go to http://yourserverip:txadminPort example: http://164.132.151.157:3005.
Enter the pin code and click on link account

You need to give txadmin permissions now. Click on Yes, allow

Enter a backup password for txadmin

Configure the a new txadmin profile. Click on next

Enter a servername and click on next

Enter the serverdata folder: /home/container/. Click on next

Enter your server.cfg location: /home/container/server.cfg. Click on next

Click on Save & Start server

Txadmin is now ready to use!

Published on: 25 / 06 / 2020